Application / Suitable
| Priority for Large Glider, Sailplane-F3J, F3B, F3F, F5J. |
Electrical Specification (Function Of The Performance)
| Torque At 6.0V | 9.6 kg-cm / 133.3 oz-in |
| Torque At 7.4V | 11.4 kg-cm / 158.3 oz-in |
| Torque At 8.4V | 12.6 kg-cm / 175.0 oz-in |
| Speed At 6.0V | 0.18 sec / 60° |
| Speed At 7.4V | 0.14 sec / 60° |
| Speed At 8.4V | 0.12 sec / 60° |
Protection Mechanism
| Soft Start Protection | Soft start to a neutral position. |
| Over Voltage Protection | Over 9.0V drive the protection mode and 8.4V return to normal mode. |
| Low Voltage Protection | Lower than 4.0V, drive the protection mode and 4.5V return to normal mode. |
| Locked Rotor Protection | Stall in 5 sec, output torque goes down. |
| Temperature Protection | Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode. |
Power Supply
| Operating Voltage Range | 4.5V ~ 8.5V ( 4 ~ 6 Cell Ni-MH or 2S HV Li-Poly / 2S Li-Fe) |
Control Specification
| Control System | Higher-order Algorithm of【STMicroelectronics】32-bit MCU ( Microcontroller Unit ) Frequency：Up to 400Hz / Neutral：1500us or 1520us |
| Dead Band Width | 0.001ms ( Default：1us) |
| Potentiometer (Variable Resistor) | Magnetic Hall-effect Sensor【Non-Contact】instead of traditional VR. |
Mechanical Specifications
| Ball Bearing | Dual Ball Bearings |
| Gear | All Metal Gears |
| Outside Case | Full One-Piece Aluminum CNC Casing |
| Motor | High-Premium Coreless Motor |
| Horn / Gear Spline | 25 Teeth ( Same as F-Type ) |
Physical Specifications
| Dimension (mm) | 30 x 10 x 34.5 mm / 1.18 x 0.39 x 1.36 in |
| Weight (gram) | 28.4 ± 1 grams / 1.0 oz ( W/O Cable ) |
| Product Picture / Dimension Sketch | .png) |