Application / Suitable
| Priority for 3D Airplane, Hang-Glider & 1/12th EP On-Road Car. |
Electrical Specification (Function Of The Performance)
| Torque At 6.0V | 10.8 kg-cm / 150.0 oz-in |
| Torque At 7.4V | 13.3 kg-cm / 184.7 oz-in |
| Torque At 8.4V | 15.1 kg-cm / 209.7 oz-in |
| Speed At 6.0V | 0.07 sec / 60° |
| Speed At 7.4V | 0.06 sec / 60° |
| Speed At 8.4V | 0.05 sec / 60° |
Protection Mechanism
| Soft Start Protection | Soft start back to neutral position. |
| Locked Rotor Protection | Stall in 5 sec, output torque goes down. |
| Temperature Protection | Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode. |
| Lose Control Protection | When losing the transmitter signal, that servo will be back to the neutral position immediately and lock. |
Power Supply
| Operating Voltage Range | 4.5V ~ 8.7V DC ( 2S HV Li-Poly / 2S Li-Fe Compatible ) |
Control Specification
| Control System | Higher-order Algorithm of【STMicroelectronics】32-bit MCU ( Microcontroller Unit ) Frequency：Up to 400Hz / Neutral：1500us or 1520us |
| Dead Bend Width | 0.001ms ( Default：1us) |
| Potentiometer (Variable Resistor) | Magnetic Hall-effect Sensor【Non-Contact】instead of traditional VR. |
Mechanical Specifications
| Ball Bearing | Dual Ball Bearings |
| Gear | All Durable Metal Gears |
| Outside Case | Full One-Piece Aluminum CNC Casing |
| Motor | Custom High-Efficiency Coreless Motor |
| Horn / Gear Spline | 25 Teeth |
Physical Specifications
| Dimension (mm) | 35.5 x 15 x 29 mm / 1.4 x 0.59 x 1.14 in |
| Weight (gram) | 35.5 ± 1 grams / 1.25 oz |
| Product Picture / Dimension Sketch |  |