BMS-590SG [$103.21-]
8.4V@63.3 kg/879.2oz
8.4V@0.14sec
[ Including 1 piece of 15T Aluminum Servo Arm ]
DETAILS
Application / Suitable
| 1/6 ~ 1/8th Short Course, Buggy ( Off-Road ), GT ( On-road ), Monster Truck, Rock Crawler |
Specifications
| Torque At 6.0V |
45.7 kg-cm / 634.8 oz-in |
| Torque At 7.4V |
55.8 kg-cm / 775.1 oz-in |
| Torque At 8.4V |
63.3 kg-cm / 879.2 oz-in |
| Speed At 6.0V |
0.19 sec / 60° |
| Speed At 7.4V |
0.16 sec / 60° |
| Speed At 8.4V |
0.14 sec / 60° |
Protection Mechanism
| Soft Start Protection |
Soft start to a neutral position. |
| Over Voltage Protection |
Over 9.0V drive the protection mode and 8.4V return to normal mode. |
| Low Voltage Protection |
Lower than 4.0V, drive the protection mode and 4.5V return to normal mode. |
| Locked Rotor Protection |
Stall in 5 sec, output torque goes down. |
| Temperature Protection |
Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode. |
| Lose Control Protection |
When losing the transmitter signal, that servo will be back to the neutral position immediately and lock. |
Power Supply
| Operating Voltage Range |
4.5V ~ 8.7V ( 2S Li-Fe & HV Li-Poly Compatible ) |
Control Specification
| Control System |
32-bits CPU Digital Calculator / AD 12-Bits Resolution ( 4096 Steps )
Frequency：Up to 333Hz & Neutral：1500us or 1520us |
| Dead Band Width |
0.002ms ( Default：2us) |
Mechanical Specifications
| Ball Bearing |
Dual, Stronger Ball Bearings |
| Gear |
Stainless Steel Output Gear With All Matel Gears |
| Motor |
High-Efficiency Coreless Motor |
| Outside Case |
Middle: Aluminum Alloy Case W/ Upper & Bottom: Industrial Plastic Cases |
| Horn / Gear Spline |
15 Teeth ( Universal Type ) |
| Connected Cable Length |
300 mm (11.81 in) |
Physical Specifications
| Dimension (mm) |
59.7 x 29.6 x 54.6 mm / 2.35 x 1.16 x 2.15 in |
| Weight (gram) |
167.0 ± 1 grams / 5.89 oz |
| Product Picture / Dimension Sketch |
 |
