Application / Suitable
| 1/8th、1/10th、1/12th 2WD, 4WD On-Road & Airplane & Helicopter |
Electrical Specification (Function Of The Performance)
| Torque At 6.0V | 24.6 kg-cm / 341.7 oz-in |
| Torque At 7.4V | 28.3 kg-cm / 393.1 oz-in |
| Torque At 8.4V | 30.1 kg-cm / 418.1 oz-in |
| Speed At 6.0V | 0.11 sec / 60° |
| Speed At 7.4V | 0.09 sec / 60° |
| Speed At 8.4V | 0.08 sec / 60° |
Protection Mechanism
| Soft Start Protection | Soft start back to neutral position. |
| Over Voltage Protection | Over 9.0V drive the protection mode, and 8.4V return to normal mode. |
| Low Voltage Protection | Lower than 4.0V, drive the protection mode, and 4.5V return to normal mode. |
| Locked Rotor Protection | Stall in 5 sec, output torque goes down. |
| Temperature Protection | Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode. |
| Lose Control Protection | When losing the transmitter signal, that servo will immediately be back to the neutral position and locked. |
Power Supply
| Operating Voltage Range | 4.5V ~ 8.7V DC ( 2S HV Li-Poly / 2S Li-Fe Compatible ) |
Control Specification
| Control System | Higher-order Algorithm of【STMicroelectronics】32-bit MCU ( Microcontroller Unit ) Frequency：Up to 400Hz / Neutral：1500us or 1520us |
| Frame Rate (Signal repeat rate) | Under 3ms【Compatible with SSR Mode of Sanwa】 |
| Dead Bend Width | 0.001ms ( Default：1us ) |
| Potentiometer (Variable Resistor) | Magnetic Hall-effect Sensor【Non-Contact】instead of traditional VR. |
Mechanical Specifications
| Ball Bearing | Dual, Stronger Ball Bearings.【NMB from Japan】 |
| Gear | All Metal Alloy Gears |
| Outside Case | Full One-Piece Aluminum CNC Casing |
| Motor | Custom High-Premium Brushless Motor |
| Horn / Gear Spline | 25 Teeth |
Physical Specifications
| Dimension (mm) | 40.8 x 21 x 25.4 mm / 1.60 x 0.83 x 1.0 in |
| Weight (gram) | 49.5 ± 1 grams / 1.74 oz |
| Product Picture / Dimension Sketch | (1).png) |