Application
| Priority for 3D Airplane, Helicopter 550-Class Swashplate CCPM cyclic and Tail used & 1/12th EP On-Road Car |
Specifications
| Torque At 6.0V | 14.6 kg-cm / 202.8 oz-in |
| Torque At 7.4V | 16.5 kg-cm / 229.2 oz-in |
| Torque At 8.4V | 18.5 kg-cm / 256.9 oz-in |
| Speed At 6.0V | 0.11 sec / 60° |
| Speed At 7.4V | 0.09 sec / 60° |
| Speed At 8.4V | 0.08 sec / 60° |
Protection Mechanism
| Soft Start Protection | Soft start to a neutral position. |
| Locked Rotor Protection | Stall in 5 sec, output torque goes down. |
| Temperature Protection | Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode. |
Power Supply
| Operating Voltage Range | 4.5V ~ 8.7V ( 4 ~ 6 Cell Ni-MH or 2S Li-Fe & HV Li-Poly Compatible ) |
Control Specification
| Control System | 32-bits CPU Digital Calculator / AD 12-Bits Resolution ( 4096 Steps ) Frequency：Up to 333Hz & Neutral：1500us or 1520us |
| Dead Band Width | 0.001ms ( 1us ) |
Mechanical Specifications
| Ball Bearing | Dual |
| Gear | All Metal Gears |
| Motor | High-Efficiency Coreless Motor |
| Horn / Gear Spline | 25 Teeth |
Physical Specifications
| Dimension (mm) | 35.5 x 15 x 29 mm / 1.4 x 0.59 x 1.14 in |
| Weight (gram) | 34.0 ± 1 grams / 1.19 oz |
| Product Picture / Dimension Sketch |  |