Water-Proof Series

CLS-43AWC *[$99.99-]

8.4V@49.1kg/682.0oz
8.4V@0.12sec
IP=Ingress Protection Rating
6=Dust Tight / 7=Immersion up to 1 Meter depth of 30 minutes
[ Including Lockable Aluminum Servo Arm (Horn) * 1 piece ]
  • CLS-43AWC
DETAILS
Application / Suitable
1/6th、1/8th Crawler, Monster & Airplane, Jets & Boats.
 
Specifications
Torque At 6.0V 35.8 kg-cm / 497.3 oz-in
Torque At 7.4V 43.3 kg-cm / 601.4 oz-in
Torque At 8.4V 49.1 kg-cm / 682.0 oz-in
Speed At 6.0V 0.16 sec / 60°
Speed At 7.4V 0.13 sec / 60°
Speed At 8.4V 0.12 sec / 60°
 
Protection Mechanism
Soft Start Protection Soft start to a neutral position.
Over Voltage Protection Over 9.0V drive the protection mode and 8.4V return to normal mode.
Low Voltage Protection Lower than 4.0V, drive the protection mode and 4.5V return to normal mode.
Locked Rotor Protection Stall in 5 sec, output torque goes down.
Temperature Protection Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees Freturn to normal mode.
Lose Control Protection When losing the transmitter signal, that servo will be back to the neutral position immediately and lock.
 
Power Supply
Operating Voltage Range  4.5V ~ 8.5V ( 4 ~ 6 Cell Ni-MH or 2S Li-Poly / 2S Li-Fe)
 
Control Specification
Control System Digital Controller / AD 12-Bits Resolution ( 4096 Steps )
Frequency:Up to 333Hz / Neutral:1500us or 1520us
Dead Band Width 0.001ms ( Default:1us)
 
Mechanical Specifications
Ball Bearing Dual ball bearings with 1 piece of oil seal
Gear Stainless output shaft with Steel Alloy Metal Gears
Motor High Premium Coreless Motor
Horn / Gear Spline 25 Teeth ( Same as F-Type )
Connected Cable Length 300 mm (11.81 in) [ Black Cladding Cable Edition ]
 
Physical Specifications
Dimension (mm) 40.6 x 20.6 x 41.2 mm / 1.60 x 0.81 x 1.62 in
Weight (gram) 85.0 ± 1 grams / 2.99 oz
Product Picture / Dimension Sketch